P.7
P.8
Moods
Along with a strong character, RoboMe™ also has several different moods. If you interact with RoboMe™
a lot, it will be happier than if it is waiting for instructions. After about ten minutes of no play, RoboMe™
will be sad.
To know what mood RoboMe™ is in, check the LED Mood Indicator
located in the center of the robot’s body. RoboMe™ has four main
moods and will make comments as it changes moods. Once you get to
know RoboMe™, you will be able to tell what mood it is moving into.
Games
RoboMe™ has three games that you can play without a smart device connected.
To activate Game Mode:
1. Press the GAME button on the remote controller.
2. RoboMe™ will say the name of a game. To select the game, press the YES button.
NOTE: If you press NO or do not respond within a few seconds, a beep sound will indicate that the
robot has exited Game Mode. To have the robot suggest another game,
press the GAME button again.
3. After you press YES, RoboMe™ will give verbal instructions on how
to play. Use the remote controller to interact with him. When playing,
follow his instructions.
NOTE: If you do not respond quickly enough, the game will not start and
a beep sound will indicate that the robot has exited Game Mode. To
have the robot suggest another game, press the GAME button again.
4. To stop the game, either press NO or wait for a minute.
Follow The Leader
In Follow The Leader, RoboMe™ will give verbal instructions for you to perform using the drive control
buttons on the remote controller to move him about. Do as you are instructed and RoboMe™ will
be happy.
Shake My Hand
RoboMe™ will ask if you want to shake his hand. If you want to play, just shake his hand. You do not have
to press YES on the remote controller. If you do press YES, he will exit the game.
Magic 8 Ball
RoboMe™ can act as a Magic 8 Ball. Select the game and the robot will tell you when to ask your question.
Game mode
RoboMe™ moods
Using a smart device and app with RoboMe™
RoboMe™ is lots of fun, but connecting a smart device and downloading the app will widen the number
of functions and features, creating a more personalized robot experience. RoboMe™ is compatible with
iPod Touch 4th generation and above and iPhone 4 and above, running a minimum of iOS 6 and above.
To connect RoboMe™ to a smart device:
1. Switch RoboMe™ off, then gently remove the panel on the back of the robot by pushing down on the
latch located directly below the WowWee logo. The panel will come away from the back.
2. Next, open and extend the head smart device holder by pressing on the button on the back of
RoboMe™’s built-in face, near the chin.
3. To connect your smart device, unwind the cable and place the cable jack into the headphone jack
socket on your smart device.
4. Then, carefully place your smart device into RoboMe™’s smart device holder, squeezing the ears closed
until the smart device rests snugly inside the head vice.
Note: RoboMe™ will give you a verbal indicator when he changes his mood.
Mood
Happy
Normal
Bored
Sad
LED Indicator
Green
Yellow
Red
Blue
Содержание RoboMe
Страница 1: ...Instruction Manual ITEM NO 0810 ...
