9
(2).Wait for about 10 seconds, the indicator light on the rear of
the drone is always on, indicating that the calibration is
successfully completed.
Geomagnetic Calibration
(1).Press the calibration compass button on remote control, wait for
the remote control to make a beeping sound and release the
button. The front green light of the drone will flash quickly, and
the rear red light will be steady on, indicating that the compass
calibration is started. (
Please be noted that long pressing this
button for 3 seconds will activate emergency stop function
)
(2).Pick up the drone and keep it horizontal, then rotate the drone
clockwise at a constant speed (approximately 3-5 rotations),
wait until the front green light is on, the rear red light flashes
quickly, and the remote control will beep once, indicating the
horizontal direction Calibration is completed.
30cm