70
Advanced Operation
code.
After setting a non-standard DCS code, press the [LOCK] key to set it as a Positive or
Negative code, or press the [SCAN] key to select OFF.
After selecting the DCS menu setting (RX-DCS or TX-DCS), enter the desired DCS
code from the keypad on the hand microphone, press [LOCK] to select the Positive or
Negative code, and then press MENU to confirm.
Example 1: Set the receive DCS as D105N
In standby, press [MENU] + [2] + [6] and the screen will display: RX-DCS. Press
[MENU] and input [1] + [0] + [5], then press [LOCK] to select the Positive code.
The screen will display D105N. Press [MENU] to confirm, and then press [LOCK] to
return to standby.
Example 2: Set the receive DCS as D105I
In standby, press [MENU] + [2] + [6] and the screen will display: RX-DCS. Press
[MENU] and input [1] + [0] + [5], then press [LOCK] to select the Negative code. The
