45
Basic Operation
Basic Operation
is only useful when using the KG-1000M to listen to scrambled transmissions on non-
MURS frequencies.
(*) [SCAN] Scanning Hotkey
In standby, press the [SCAN] key on the hand microphone to initiate a channel or
frequency scan. In Frequency (VFO) mode, the radio will scan by the step frequency.
In Channel (MR) mode, the radio will scan the channels programmed into it, starting
from the current channel. Pressing the UP/DOWN keys while scanning will change
the direction of the scan from low to high (UP) or high to low (DOWN). Press any key
to stop the scan. Refer to MENU 9 (p 50) for more information on the types of scans
available.
Simultaneous Scanning on the A and B Areas
The A and B areas can perform a scan at the same time. To do this, press [SCAN] to
activate the scan on the A Area , press [MAIN] to go to the B area, then press [SCAN]
to activate the scan on B area. Both areas should scan simultaneously.
▪
When the PTT is pressed to transmit on the Primary Frequency Area during a
