45
Basic Operation
Basic Operation
the direction of the scan from low to high (UP) or high to low (DOWN). Press any
key to stop the scan. Refer to MENU 10 (p 51) for more information on the types of
scans available.
Simultaneous Scanning on the A and B Areas
The A and B areas can perform a scan at the same time. To do this, press [SCAN] to
activate the scan on the A Area , press [MAIN] to go to the B area, then press [SCAN]
to activate the scan on B area. Both areas should scan simultaneously.
▪
When the PTT is pressed to transmit on the Primary Frequency Area during a
scan, the Secondary area will stop scanning temporarily. When the PTT is released
at the end of transmission, scanning on the Secondary area will resume.
▪
During a scan, pressing the [SCAN] key will only stop the scan on the currently
selected Area.
▪
Pressing the [VFO/MR] key will also stop the scan in the currently selected Area.
