3
JOINTED ARM AWNINGS
08/2019
©
WOUNDWO
WO
UND
WO
jointed arm awnings are primarily designed to protect against solar radiation. They can also be used as rain protection to a limited
extent (see 7.1. for details). Any other use or use that extends beyond this shall be deemed improper. The manufacturer assumes no liability for
any resultant damages.
No changes, additions or conversions may be made to the jointed arm awnings without the manufacturer‘s consent. Jointed arm awning parts
in an imperfect condition must be replaced immediately. Only genuine spare parts specified by the manufacturer may be used. In the case of
parts sourced from third parties, there is no guarantee that these have been designed and manufactured in line with safety and loading requi-
rements.
If the jointed arm awnings suffer additional loading as a result of suspended objects or the cord slackening, this can lead to the jointed arm
awnings malfunctioning and becoming damaged. Such actions are therefore impermissible.
Assembly and maintenance work may only be performed by qualified staff.
The connection must be fused and de-energised whilst inspecting or maintaining electrical parts.
WO&WO Sonnenlichtdesign GmbH & Co KG assumes no liability for damages caused by improper use.
It is important to follow these instructions for people‘s safety. These instructions must be kept.
All
WO
UND
WO
awnings are designed and manufactured in line with the provisions set forth in the EN 13561 standard. Nonetheless,
dangers can arise for the people involved and/or the product can be impaired or other property damaged.
5. INTENDED USE
4. SAFETY
3. VALIDITY
OPERATING MOTORISED OPERATION AWNINGS:
Do not allow children to play with the awning‘s control unit. Keep remote controls out of the reach of children.
Examine the equipment regularly for signs of wear or damage on the cables.
Observe the programming instructions of the supplied control units.
Do not use if a repair is required.
MANUALLY OPERATING AWNINGS USING A CRANK HANDLE:
Take care when manually operating the retracted awning, as it can fall down quickly due to springs that are too weak or broken.
The product may only be operated as intended, in a technically perfect condition, in a safety- and risk-conscious manner and in
accordance with these instructions for use. Faults that could compromise safety are to be rectified immediately.
TECHNICAL DATA
The dimensions and technical details of jointed arm awnings can be found in the current catalogue available from specialist dealers, in the instruc-
tions for assembly or in the
WO
UND
WO
partner area at www.woundwo.com.
PARAMETER
VALUE
Mains voltage
230 V AC
Current consumption
0.45 – 2.1 A (depending on the drive)
Power consumption
90 – 460 W (depending on the drive)
Protection class – electric drive
IP 44
Permanent operation – motor
Approx. 4 minutes
DATA FOR THE ELECTRIC DRIVE
The electric motor is not designed for permanent operation. After approx. 4 minutes of operation, the thermal protection starts and the
motor switches off. The motor is ready for operation again after 15 – 30 minutes. However, the new actuation time is considerably red-
uced, lasting 1 – 2 minutes.
6. PRODUCT INFORMATION
These instructions for use are valid for the following
WO
UND
WO
standard jointed arm awnings:
TRENDLINE CASSETTE, TRENDLINE SUNBOX, TRENDLINE SMARTBOX, TRENDLINE.
