woundwo FL-M1, Инструкция по эксплуатации

Страница: 3 / 10

3
WINDOW SHUTTER
06/2019 © WO UND WO
These instructions apply for the following WO UND WO shutters:
WINDOW SHUTTER WITH MOUNTING FRAME
WINDOW SHUTTER WITH MOUNTING FRAME FOR INSECT SCREEN
WINDOW SHUTTER WITHOUT MOUNTING FRAME FOR MOUNTING DIRECTLY ON THE WINDOW
WO UND WO shutters serve primarily to protect from sunlight and heat. In addition, WO UND WO shutters provide enhanced soundproofing,
privacy, security and façade protection. Any other use or application over and above the aforesaid is deemed to be a non-intended use. The
manufacturer does not accept any liability for damages resulting from non-intended product uses.
No modifications, extensions or alterations may be made to any WO UND WO shutters without the manufacturer’s approval. Additional loading
due to hanging objects from the shutters may result in damage and is therefore not permitted. Shutters not in perfect working order must be
replaced promptly by a specialist supplier.
To replace worn or defective parts, use only spare parts approved by WO UND WO . If parts are purchased from a third-party supplier, there is no
guarantee that they are designed and manufactured for the relevant load and safety requirements.
Installation and maintenance activities must be carried out exclusively by specialist companies and qualified technical personnel.
WO&WO Sonnenlichtdesign GmbH & Co KG does not accept any liability for damages resulting from a non-intended use of the product.
All WO UND WO shutters are designed and manufactured according to EN 13659. However, failure to follow the accompanying instruc-
tions when operating the equipment may result in risk of injury to people or animals, or may damage the installation or other objects.
The product should be operated only as intended, and only if it is in technically perfect working order, bearing in mind the safety
aspects and risks, in compliance with these instructions for use.
Faults that may compromise safety must be removed immediately.
5. INTENDED USE
4. SAFETY
3. VALIDITY