Worx WXI 4CSA, Руководство по эксплуатации, Страница: 2 / 16

GENERAL SAFETY RULES
WARNING! Read all instructions.
Failure to followall all instructions listed
below may result in electricshock, fire and/or
serious injury. The term “powertool” in all of
the warnings listed below refers to yourmains
operated (corded) power tool or battery
operated (cordless) power tool.
SAVE THESE INSTRUCTIONS.
1. Work area
a) Keep work area clean and well lit.
Cluttered and dark areas invite accidents.
b) Do not operate power tools in
explosive atmospheres, such as in the
presence of flammable liquids, gases
or dust.
Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose control.
2. Electrical safety
a) Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded)power tools.
Unmodified plugs and matching outlets
will reduce risk of electric shock.
b) Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric shock
if your body is earthed or grounded.
c) Do not expose power tools to rain or
wet conditions.
Water entering a power
tool will increasethe risk of electric shock.
d) Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges or moving parts.
Damaged or
entangledcords increase the risk of electric
shock.e)
e) When operating a power tool
outdoors, usean extension cord
suitable for outdoor use.
Use of a cord
suitable for outdoor use reduces therisk of
electric shock.
3. Personal safety
a) Stay alert, watch what you are
doing and use common sense when
operating a power tool. Do not use
a power tool while you are tired or
under the influence of drugs, alcohol
or medication.
A moment of inattention
while operating power tools may result in
serious personal injury.
b) Use safety equipment. Always wear
eye protection.
Safety equipment
such as dust mask,non-skid safety shoes,
hard hat, or hearing protection used for
appropriate conditions will reducepersonal
injuries.
c) Avoid accidental starting. Ensure the
switch is in the off position before
plugging in.
Carrying power tools with
your finger on the switch or plugging in
power tools that have the switch on invites
accidents.
d) Remove any adjusting key or wrench
before turning the power tool on.
A
wrench or a key left attached to a rotating
part of the power tool may result in
personal injury.
e) Do not overreach. Keep proper
footing and balance at all times.
This
enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose
clothing or jewellery. Keep your
hair, clothing and gloves away from
moving parts.
Loose clothes, jewellery or
long hair can be caught in moving parts.
g) If devices are provided for the
connection of dust extraction and
collection facilities ensure these are
connected and properly used.
Use
of these devices can reduce dust related
hazards.
4. Power tool use and care
a) Do not force the power tool. Use
the correct power tool for your
application.
The correct power tool will
do the job better and safer at the rate for
which it was designed.
b) Do not use the power tool if the
switch does not turn it on and off.
Any power tool that cannot be controlled
with the switch is dangerous and must be
ENG-WX14CSA-M-061227.indd 2 2007-1-5 13:39:14