Worx WX891, Инструкция по безопасности и эксплуатации

Страница: 8 / 12

8
20V Cordless Drain Auger WX891 WX891.X
COMPONENT LIST
1. SWITCH LEVER
2. FORWARD AND REVERSE ROTATION PUSHER
3. ON/OFF SWITCH
4. BATTERY PACK RELEASE BUTTON *
5. BATTERY PACK *
6. RATCHET
7. LED LIGHT
8. HOLE FOR WATER TO LEAK OUT
9. FLEXIBLE SHAFT
10. WATERPROOF PLUG
* Not all the accessories illustrated or described are
included in standard delivery.
TECHNICAL DATA
Type WX891 WX891.X (891 - designation of
machinery, representative of drain auger)
WX891 WX891.X**
Voltage 20 V Max. ***
Speed 0~560 rpm
Dredging capability φ19~76 mm
Shaft size L*D=7.6 m * φ 7 mm
Machine weight (bare tool) 3.4 kg
** X=1-999, A-Z, M1-M9 there are only used for different
customers, there are no safe relevant changes between
these models.
*** Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal voltage
is 18 volts.
Category Type Capacity
20V Battery
WA3550 1.5 Ah
WA3550.1 1.5 Ah
WA3551 2.0 Ah
WA3551.1 2.0 Ah
WA3553 4.0 Ah
WA3014 4.0 Ah
20V Charger
WA3760 0.4 A
WA3869 2.0 A
WA3880 2.0 A
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to the
accessory packaging for further details. Store personnel
can assist you and offer advice.
NOISE INFORMATION
A weighted sound pressure L
pA
: 66 dB(A)
A weighted sound power L
wA
: 77 dB(A)
K
pA
& K
wA
3 dB(A)
Wear ear protection.
VIBRATION INFORMATION
Vibration emission value: a
h
= 0.74 m/s
2
Uncertainty K = 1.5 m/s²
The declared vibration total value and the declared noise
emission value have been measured in accordance with
a standard test method and may be used for comparing
one tool with another.
The declared vibration total value and the declared
noise emission value may also be used in a preliminary
assessment of exposure.
WARNING:
The vibration and noise emissions
during actual use of the power tool can differ from
the declared value depending on the ways in which
the tool is used especially what kind of workpiece is
processed dependant on the following examples and
other variations on how the tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained.
The use of the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti
vibration and noise accessories are used.
And the tool is being used as intended by its design and
these instructions.
This tool may cause hand-arm vibration syndrome
if its use is not adequately managed.
WARNING:
To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off and
when it is running idle but not actually doing the job. This
may significantly reduce the exposure level over the total