Worx WX822, Инструкция по безопасности и эксплуатации

Страница: 9 / 12

9
WX822 WX822.X 20V Cordless Detail Sander
2. COMPONENT LIST
1. ON/OFF SWITCH
2. HANDLE
3. BATTERY PACK RELEASE BUTTON
4. BATTERY PACK
5. DUST BAG
6. DETAIL PLATE
7. FINGER PLATE
8. 140X90MM DETAIL H&L SANDING PAPER*
9. 76X30MM FINGER H&L SANDING PAPER*
*Not all the accessories illustrated or described
are included in standard delivery.
3. TECHNICAL DATA
Type Designation
WX822 WX822.X (82 -
designation of machinery, representative of
Sander)
WX822 WX822.X **
Voltage 20 V Max***
No-load speed 12000 /min
Plate size 140x90mm
Orbital diameter 2mm
Machine weight
(bare tool)
0.8kg
**X=1-999, A-Z, M1-M9 there are only used for different
customers, there are no safe relevant changes
between these models.
*** Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal voltage
is 18 volts.
SUGGESTED BATTERIES AND
CHARGERS
Category Model Capacity
20V Battery
WA3550 1.5Ah
WA3550.1 1.5Ah
WA3551 2.0Ah
WA3551.1 2.0Ah
WA3553 4.0Ah
20V Charger
WA3760 0.4A
WA3860 2.0A
WA3880 2.0A
We recommend that you purchase your accessories
listed in the above list from the same store that sold
you the tool. Refer to the accessory packaging for
further details. Store personnel can assist you and
offer advice.
NOISE INFORMATION
A weighted sound pressure L
pA
: 74.1dB(A)
A weighted sound power L
wA
: 85.1dB(A)
K
pA
&K
wA
3 dB(A)
Wear ear protection.
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined
according to EN 62841:
Vibration emission
value:
a
h
= 5.614m/s
2
Uncertainty K = 1.5m/s²
The declared vibration total value and the declared noise
emission value have been measured in accordance with
a standard test method and may be used for comparing
one tool with another.
The declared vibration total value and the declared noise
emission value may also be used in a preliminary.
WARNING: The vibration and noise emissions
during actual use of the power tool can differ from