background image

4

WX822 WX822.X

20V Cordless Detail Sander

not turn it on and off. 

Any power tool that cannot 

be controlled with the switch is dangerous and 

must be repaired.

c)    Disconnect the plug from the power 

source and/or remove the battery pack, 

if detachable, from the power tool before 

making any adjustments, changing 

accessories, or storing power tools.

 Such 

preventive safety measures reduce the risk of 

starting the power tool accidentally.

 

d)    Store idle power tools out of the reach of 

children and do not allow persons unfamiliar 

with the power tool or these instructions 

to operate the power tool. 

Power tools are 

dangerous in the hands of untrained users. 

e)    Maintain power tools and accessories. Check 

for misalignment or binding of moving parts, 

breakage of parts and any other condition 

that may affect the power tool’s operation. 

If damaged, have the power tool repaired before 

use. Many accidents are caused by poorly 

maintained power tools. 

f)    Keep cutting tools sharp and clean. 

Properly 

maintained cutting tools with sharp cutting edges 

are less likely to bind and are easier to control. 

g)    Use the power tool, accessories and tool bits 

etc. in accordance with these instructions, 

taking into account the working conditions 

and the work to be performed. 

Use of the 

power tool for operations different from those 

intended could result in a hazardous situation. 

h)    Keep handles and grasping surfaces dry, 

clean and free from oil and grease. 

Slippery 

handles and grasping surfaces do not allow 

for safe handling and control of the tool in 

unexpected situations. 

5)    Battery tool use and care 

a)    Recharge only with the charger specified by 

the manufacturer. 

A charger that is suitable for 

one type of battery pack may create a risk of fire 

when used with another battery pack. 

b)    Use power tools only with specifically 

designated battery packs. 

Use of any other 

battery packs may create a risk of injury and fire. 

c)    When battery pack is not in use, keep it away 

from other metal objects, like paper clips, 

coins, keys, nails, screws or other small metal 

objects, that can make a connection from 

one terminal to another. 

Shorting the battery 

terminals together may cause burns or a fire.

d)    Under abusive conditions, liquid may be 

ejected from the battery; avoid contact. If 

contact accidentally occurs, flush with water. 

If liquid contacts eyes, additionally seek 

medical help. 

Liquid ejected from the battery 

may cause irritation or burns. 

e)    Do not use a battery pack or tool that is 

damaged or modified. 

Damaged or modified 

batteries may exhibit unpredictable behaviour 

resulting in fire, explosion or risk of injury. 

f)    Do not expose a battery pack or tool to fire 

or excessive temperature. 

Exposure to fire or 

temperature above 130 °C  may cause explosion. 

g)    Follow all charging instructions and 

do not charge the battery pack or tool 

outside the temperature range specified 

in the instructions. 

Charging improperly or at 

temperatures outside the specified range may 

damage the battery and increase the risk of fire. 

6)    Service 

a)    Have your power tool serviced by a 

qualified repair person using only identical 

replacement parts. 

This will ensure that the 

safety of the power tool is maintained. 

b)    Never service damaged battery packs. 

Service of battery packs should only be 

performed by the manufacturer or authorized 

service providers.

SAFETY WARNINGS FOR 

BATTERY PACK 

a)  Do not dismantle, open or shred cells or 

battery pack. 

b)  Do not short-circuit a battery pack. Do not 

store battery packs haphazardly in a box or 

drawer where they may short-circuit each 

other or be short-circuited by conductive 

materials.

 When battery pack is not in use, keep 

it away from other metal objects, like paper clips, 

coins, keys, nails, screws or other small metal 

objects, that can make a connection from one 

terminal to another. Shorting the battery terminals 

together may cause burns or a fire.

c)  Do not expose battery pack to heat or fire. 

Avoid storage in direct sunlight.

d)  Do not subject battery pack to mechanical 

shock.

e)  In the event of battery leaking, do not allow 

the liquid to come into contact with the skin 

or eyes. If contact has been made, wash the 

affected area with copious amounts of water 

and seek medical advice.

f)  Keep battery pack clean and dry.

g)  Wipe the battery pack terminals with a clean 

dry cloth if they become dirty.

h)  Battery pack needs to be charged before use. 

Always refer to this instruction and use the 

correct charging procedure.

i)  Do not maintain battery pack on charge when 

not in use.

j)  After extended periods of storage, it may 

be necessary to charge and discharge 

the battery pack several times to obtain 

Содержание WX822













Отзывы: