Worx WG801, Руководство пользователя, Страница: 10 / 28

20V Cordless Shrub Shear & Grass Shear EN
10 10
OPERATING INSTRUCTIONS
NOTE:
Before using the tool, read the
instruction book carefully.
INTENDED USE
The product is intended for light trimming of shrubs
and lawn edges in domestic use.
ASSEMBLY AND OPERATION
ACTION FIGURE
ASSEMBLY (Fitting/Changing the blade)
OPERATION
Removing the blade
WARNING:
Wear gloves when
changing the blade.
See Fig.
A1, A2
Fitting the blade
See Fig.
B1, B2
BEFORE OPERATION
Checking the battery condition (for
WG801 WG801.1)
See Fig. C1
Charging the battery pack
More details can be found in
charger’s manual
See Fig. C2
Installing the battery pack
Removing the battery pack
See Fig. C3
See Fig. C4
MAINTENANCE
NOTE:
To ensure long and reliable service, carry out
the following maintenance regularly.
Remove the battery before carrying out any
adjustment, servicing or maintenance.
Check for obvious defects such as loose, dislodged
or damaged blade, loose fixings and worn or
damaged components.
Check that covers and guards are undamaged and
correctly fitted. Carry out necessary maintenance or
repairs before using.
FOR BATTERY TOOLS
The ambient temperature range for the use and
storage of tool and battery is 0
o
C-45
o
C.
The recommended ambient temperature range for
the charging system during charging is 0
o
C-40
o
C.
BLADE MAINTENANCE
Always clean the cutting blades after operation and
periodically lubricating the cutting blade.
Visually check the condition of the cutting edges of
the cutting blade.
Ensure that the blade is covered with the blade guard
supplied when not in use.
CLEANING/STORAGE
Clean the exterior of the machine thoroughly using
a soft brush and cloth. Do not use water, solvents
or polishes. Remove all debris, especially from the
ventilation slots.
Store the machine in a secure dry place out of reach
of children. Do not place other objects on top of the
machine.
Starting& Stopping See Fig. D
Trimming grass (for WG801, WG801.9)
NOTE: Keep the tool away from hard
objects and delicate plants.To make a
closer cut, slightly tilt the tool.
See Fig. E
Trimming hedges and shrubs
NOTE: Take care to avoid any foreign
objects. Especially avoid hard objects
such as metal wire and railings, as
these could damage the blades.
See Fig. F