Worx WG782, Руководство пользователя

Страница: 15 / 40

3-in-1 Cordless Lawn Mower EN
15
2. Remove Blade from mower. See instructions for
removing and attaching blade.
3. Secure Blade See Fig. M-1.
4. Wear safety glasses and gloves and be careful
not to cut yourself.
5. Carefully file the cutting edges of the blade with a
fine tooth file See Fig. M3 or sharpening stone.
6. Check balance of blade. See instructions for Blade
balancing.
7. Replace Blade on mower and tighten securely.
Refer to instructions below.
BLADE BALANCING (See Fig. N)
Check balance of blade by placing center hole in blade
See Fig. N1 over a nail or screwdriver shank See
Fig. N2, clamped horizontally in a vise See Fig. N3. If
either
end of the blade rotates downward, file that end. The
blade is properly balanced when neither end drops.
BLADE MAINTENANCE (See Fig. O1, O2)
Replace your metal Blade(17) after 50 hours mowing
or 2 years, which ever is the sooner-regardless of
condition.
Follow these procedures to remove and replace the
blade. You will need garden gloves (not provided)
and a spanner wrench (not provided) to remove the
blade. Hold the Blade and unscrew the Blade Bolt
(16) counter-clockwise using a spanner wrench, and
then remove blade.
To re-assemble, position the Blade with the cutting
edges towards the ground. Then securely tighten the
Blade Bolt.
STORAGE: (See Fig. P1, P2)
Stop the mower and always remove the safety key.
Clean the exterior of the machine thoroughly using
a soft brush and cloth. Do not use water, solvents or
polishes. Remove all grass and debris, especially from
the ventilation slots.
Turn the machine on its side and clean the blade area.
If grass cuttings are compacted in the blade area,
remove with a wooden or plastic implement.
Store the mower in a dry place. Do not place other
objects on top of the mower.
To aid storage, release the Handle knobs, and rotate
or fold the Upper Handle forward.