Worx WG775E, Руководство пользователя

Страница: 13 / 64

13
Cordless Lawn Mower EN
4) Attach the upper handle (6) with the bolts
and Handle Knobs (7) to the lower handle
(8). (See Fig. B2)
5) Screw on the two Handle knobs. Check
that the handle is FULLY secured.
NOtE:
Ensure the bolts are fully inserted
through the handles before fitting the
handle knobs.
6) Attach the cable clips (2) provided, to the
upper and lower handle. Insert the cable
into the clips ensuring there is enough
cable slack. (See Fig. B3)
2. GRASS COLLECtION BAG ASSEMBLy
Connect the grass box handle to the box top
as shown in Fig C1-C4.
Step 1 Press the front of the handle briefly.
(See Fig. C2)
Step 2 Then push it forward. (See Fig. C2)
Step 3 Push down the back of the handle.
(See Fig. C2)
Step 4 Finally, clip the plastic clips over the
metal frame. (See Fig. C3)
wARNING: Don’t fit the handle in
reversed direction. Fit the handle
as shown in Fig. C1.
3. GRASS COLLECtION BAG FIttING
(See Fig. D1, D2, D3)
1) Turn the mower off, wait until blade stops
and remove safety key (5).
2) Raise the safety flap (9) and hold it up,
ensure that the mulching insert has been
removed.
3) Pick up the grass collection bag by the
handle, and position grass collection bag
on the lower hooks (a) on the mower deck
(See Fig. D2).
4) Release the safety guard to lock the
grass bag into position. Ensure the grass
collection bag is installed securely (See
Fig. D3).
NOtE:
Depress the grass collection bag
slightly to ensure that it is completely
installed.
4. REMOVING/EMPtyING
Hold the grass collection bag, lift the safety
flap (9) and hold up. Remove grass collection
bag (4).
wARNING!
Always check the safety
flap can close the discharge outlet
tightly before using. Never lift the safety
flap (9) when the lawn mower is being used
without fitted grass collection bag.
5. FIttING/REMOVING BAttERy
(See Fig. E1, E2)
REMOVING BAttERy
Pull out the battery with the battery handle
directly. (See Fig. E1)
NOtE:
Be careful not to drop the battery onto
your foot or on the ground when removing it.
FIttING BAttERy
Put the battery into the battery container;
make sure the battery is fitted correctly. (See
Fig. E2)
OPERATION
1. StARtING AND StOPPING
(See Fig. F1, F2)
wARNING!
The blade continues
to rotate for a few seconds after the
machine is switched off. Allow the motor/
blade to stop rotating before switching “on”
again. Do not rapidly switch off and on.
StARtING
1) Insert safety key into the housing of the
switch box.
2) Slide the key to the right and hold in
position.
3) Pull the lever bar towards the handle and
the mower will start.
4) Release the safety key.
StOPPING
Release the switch lever.
2. BAttERy StAtUS LED’S (See Fig. G)
NOtE: the Status LED’s will indicate the
battery condition when the button on
the battery is pressed.
The LED’s constantly senses and displays the
battery condition as follows:
Press the button “POWERTEST”, the light
button is illuminated.
When the three green lights are illuminated,
the battery is in a highly charged condition.