Worx WG770, Руководство пользователя

Страница: 16 / 44

16
36V Lead-acid Lawn Mower EN
ASSEMBLY & OPERATION
ACTION FIGURE
ASSEMBLY
Assembling the handle bar See Fig. A1
Adjustment handle’s height See Fig. A2
Assembling the grass
collection bag
See Fig. B
Assembling the grass
collection bag to the lawn
mower
See Fig. C1
C2 C3
Removing/emptying the grass
collection bag
See Fig. C4
Removing the battery pack
NOTE: The battery pack
is shipped uncharged. The
battery must be fully charged
before the first mow. See Fig. D1 D2
Checking the battery charge
condition
See Fig. E1
Charging the battery pack
More details can be found in
WA3724’s manual
See Fig. E2
Installing mulching plug See Fig. F1 F2
OPERATION
Starting See Fig. G1 G2
Stopping See Fig. G3
Adjusting The Cutting Height See Fig. H
Cleaning The Mower
WARNING: Plug the hose on
the Washout port first, then
start the mower.
See Fig. I
STORAGE
NOTE:
Removing the battery
pack
See Fig J1 J2
MULCHING MOWING TIPS
When using the mulching plug, your new
mower is designed to cut the grass clippings
into small pieces and distribute them back into
the lawn, using mulching fins located inside
the mower deck.
Under normal conditions, the mulched grass
will biodegrade quickly to provide nutrients
to the lawn. Please review the following
recommendations for optimum mulching
performance,
1) Avoid mowing when the grass is wet from
rain or dew. Wet grass may form clumps
which interfere with the mulching action
and reduce runtime. The best time to mow
grass is in the late afternoon when the
grass is dry and the newly cut area will not
be exposed to direct sunlight.
2) For best mulching performance, set the
cutting height to remove about one third
of the grass blade length, ideally no more
than 1.5” inches at one time. If the lawn is
overgrown, it may be necessary to increase
the cut height to reduce the pushing effort and
prevent overloading the motor. For extremely
heavy mulching, it is advisable to first cut at a
high cut height setting, and then re-cut to the
final cut height. Otherwise, make narrower
cuts and mow slowly.
3) For best performance, keep the mower
housing free of built-up grass. From time to
time turn off mower and wait for the blade
to come to a complete stop. Then unplug
the Safety Key(6) and turn mower on its
side. Using an object such as a stick, wipe
out any accumulation of grass in the blade
area. Be careful of the sharp edges of the
blade. Clean often in wet, new grass, and
always after every use.
4) Certain types of grass or grass conditions
may require that an area be mulched a
second time to fully disperse the grass
throughout the lawn. If cutting a second
time, it is advisable to cut perpendicular
(across) the first cut pattern. DO NOT
CHANGE CUT PATTERN IN ANY WAY THAT
WOULD CAUSE MOWING DOWN A HILL.
5) Change your cutting pattern from week to
week. This will help prevent matting and
graining of the lawn.