Worx WG708, Руководство пользователя

Страница: 13 / 40

13 12
3-in-1 Lawn mower EN
13 12
SYMBOLS ASSEMBLY
imPorTaNT!
Before you assemble the
lawn mower, check the accessories
according above information, make sure the
accessories are completed.
1. FiTTiNG ThE haNdLE (See a1- a5)
1) Remove the screws (X 2) on the both side of
deck. (Fig A1)
2) Insert the lower handle (8) into the holes on
the deck provided.(Fig A2)
3) Secure with the screws provided.(Fig A2)
4) Attach the upper handle (6) with the bolts
and lock cam lever (7) to the lower handle (8).
(Fig A3)
5) Tightening the two Lock cam levers. Check
that the handle is FULLY secured.
The cam lever pressure can be adjusted by
adjusting the lock cam lever (7) clockwise/
counter-clockwise. DO NOT OVER TIGHTEN.
(Fig. A4)
NoTE:
Ensure the bolts are fully inserted
through the handles before fitting the handle
knobs.
6) Attach the cable clips (2) provided, to the
upper and lower handle. Insert the cable into
the clips ensuring there is enough cable slack.
(Fig A5)
2. GraSS CoLLECTioN baG aSSEmbLy
Connect the grass box handle to the box top
as shown in F ig B1-B4.
Step 1. Press the front of the handle briefly.
(Fig B2)
Step 2. Then push it forward. (Fig B2)
Step 3. Push down the back of the handle.
(Fig B2)
Step 4. Finally, clip the plastic clips over the
metal frame. (Fig B3)
warNiNG: don’t fit the handle in
reversed direction. Fit the handle as
shown in Fig b1.
3. GraSS CoLLECTioN baG FiTTiNG
(See C1, C2, C3)
1) unplug tool, and wait for blade to
come to a complete stop
2) Raise the safety flap (9) and hold it up,
ensure that the mulching insert has been
removed.
CPSC Danger label
Severing of toes or fingers-
Rotary mower blade.
Thrown objects from mower
deck.
Keep bystanders/children away.
Safety alert
Read the operator’s manual
Slip on slope
Double insulation
Blade continues to rotate after
the machine is switched off. Wait
until all machine components
have completely stopped before
touching them.
KEEP HANDS AND FEET AWAY
GARDER MAINS ET PIEDS À DISTANCE