11
10
High pressure cleaner WG606E WG607E
Press together and rotate the adapter clockwise to
secure it.
Removing
Press the adapter towards the trigger gun and rotate it
anti-clockwise to remove it.
When not in use, the rotary brush may be stored on
back of the machine (See Fig. N).
6. PATIO CLEANER (See Fig. O, P)
Always use the patio cleaner together with the lance
when cleaning patios or garden floors. Align the angle
connector on the top of the patio cleaner and the
rotating nozzle on the bottom.
Screw the rotating nozzle clockwise to tighten onto the
thread of the angle connector (See Fig. O).
To attach the patio cleaner to the lance Align the ridge
on the nozzle with the notch on the lance.
Check that the patio cleaner is firmly attached by pulling
on it. It should not pull out.
Removing
Press the lock button on the lance and pull out the patio
cleaner. Release the lock button.
Adjustment
Turning the regulator knob clockwise increases the
pressure, anti-clockwise decreases the pressure
(See Fig. P).
OPERATION
Connection to the water supply
WARNING:
Do not connect machine to potable
water supply.
1. Attach a suitable water hose with the correct
connection to the water supply and then attach the
other end to the water filter on the cleaner.
2. Once, the hose connection is secure, turn on the
water supply.
Alternative water supply (See Fig. Q)
A self priming mechanism allows for the product
to optionally be connected to a bucket or water
tank instead of a water supply main. With the hose
inserted into the bucket or water tank, the self
priming mechanism will draw water directly from
the bucket or tank.
NOTE: Pay close attention to the amount of
water in the bucket or water tank to ensure
that there is an adequate supply of water to
avoid running the pump dry.
1
2
1
1
2
2
+
-
K
J
L
M
N
O
P
Q
H1
H2
I
E
F
G
B
C
D
A
