11
10
High pressure cleaner WG606E WG607E
The high pressure foam nozzle must be connected to the
fixed spray nozzle to operate.
Align the ridges on the foam nozzle with the two
grooves on the fixed spray nozzle.
Press together and turn the foam nozzle clockwise to
secure it (See Fig. I).
For best operation the detergent bottle of the foam
nozzle should be located on the underside of the fixed
spray nozzle.
Rotate the lance in the trigger gun anti-clockwise until it
is in the correct position.
Adjustment (Only for WG607E)
By rotating the adjustable knob to control the amount
of the foam during the operation.
Removing
Rotate the foam nozzle anti-clockwise on the fixed
spray nozzle to detach
Storage of foam nozzle
When foam nozzle is not in use it may be stored on the
product
Located on the left side of the machine is a notch that
the foam nozzle will slide into (See Fig. J).
3. ROTOR (TURBO) NOZZLE
Insert the rotor nozzle into the lance (See Fig. K).
Align the ridge on the nozzle with the notch on the lance.
Check that the nozzle is firmly attached by pulling on it. It
should not pull out.
Removing
Press the lock button on the lance and pull out the rotor
nozzle. Release the lock button (See Fig. H2).
4. ADJUSTABLE NOZZLE (ONLY FOR WG607E)
Insert the adjustable nozzle into the lance (See Fig. L).
Align the ridge on the nozzle with the notch on the lance.
Check that the nozzle is firmly attached by pulling on it.
It should not pull out.
5. ROTARY BRUSH (ONLY FOR WG607E)
To attach the rotary brush to the trigger gun an adapter
is needed.
Insert the rotary brush into the open end of the brush
adapter (See Fig. M).
Rotate the adapter clockwise to tighten and secure the
rotary brush.
Pull gently on the rotary brush to confirm it is secure. It
should not pull out.
Next, attach the adapter to the l trigger gun by aligning
the ridges on the adapter with the grooves in the
trigger gun.
1
2
1
1
2
2
+
-
K
J
L
M
N
O
P
Q
H1
H2
I
E
F
G
B
C
D
A
