15
14
High pressure cleaner WG600E WG601E WG602E
7. Screw the water filter/hose connector back
onto the inlet on the back of the machine.
Nozzle maintenance
1. Remove any dirt deposits from the nozzles
using a needle at the back of instruction
manual.
decalcification
From time to time calcium deposits will form
in the products and accessories. The frequency
of the deposit formation depends on the
degree of hardness of your tap water. (you
can check with your local water company to
determine the hardness of your water).
1. To dissolve calcium deposits make a
mixture of one part vinegar or citric acid to
two parts hot water (40°C).
2. Pour the mixture into a suitable container
e.g. in a bowl or tray.
3. Lay the detachable accessories in the
mixture.
4. Leave them for approximately 12 hours
depending on the severity of the deposits.
5. Finally rinse the accessories with clear
water, dry them, and put them away.
power cord Replacement
If the power cord appears damaged or worn,
it must be replaced by the manufacturer, a
service agent or a similarly qualified person in
order to avoid a safety hazard. Do not attempt
to use the product with a damaged power
cord!
cLEANING/STORAGE
Clean the moulded plastic housing of the
machine using a soft brush and clean cloth. Do
not use water, solvents or polishes. Remove
all debris, especially from the motor cooling
vents.
Store in a secure, dry place out of the reach of
children.
Do not place other objects on the product.
