Worx WG284E, Инструкция по безопасности и эксплуатации, Страница: 12 / 16

Cordless Hedge Trimmer
WG284E WG284E.X
12
Top cutting
WARNING:
If any parts are
missing, damaged or broken,
do not operate your hedge trimmer
until all damaged parts have been
replaced or repaired. Failure to do
so could result in serious personal
injury. DO NOT USE WITHOUT FRONT
HANDLE AND SAFETY GUARD.
See Fig. I
Side cutting
WARNING:
Stop operating the trim-
mer before rotating the handle.
See Fig.
J1, J2
Lubricating the Cutting Blade
NOTE :
It is important to use only the
recommended standard lubricating
oil (WD-40) to avoid damage to the
blade.
See Fig. K
To store your hedge trimmer See Fig. L
5. HOW TO USE YOUR HEDGE
TRIMMER
Before cutting an area, inspect it first and remove
any foreign objects that could become thrown or
entangled in the blades. Always hold the trimmer
with both hands and with the blade away from you
before turning it on.
When trimming new growth, use a wide sweeping
action so that the stems are fed directly into the
blade.
Allow the cutting blades to reach full speed before
cutting. When operating, keep the cutting blades
away from people and objects such as walls, large
stones, trees, vehicles, etc.
If the blade stalls, immediately stop the trimmer.
Release the two Switch Levers before attempting to
clear jammed debris from the cutting blades.
Wear gloves when trimming thorny or prickly growth.
Do not attempt to cut stems that are too thick for the
cutting blade.
Top cutting
Use a wide sweeping motion (See Fig. E1). A slight
downward tilt of the cutting blades in the direction of
motion gives the best cutting results.
Side cutting
When trimming the sides of the hedge, begin at the
bottom and cut upwards, tapering the hedge inward
at the top. This shape will expose more of the hedge,
resulting in a more uniformed growth
6. MAINTENANCE
Remove the battery from Hedge trimmer
before carrying out any adjustment, servicing
or maintenance.
There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth. Always
store your power tool in a dry place. Keep the motor
ventilation slots clean. Keep all working controls
free of dust.
7. ENVIRONMENTAL
PROTECTION
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
Local Authority or retailer for recycling advice.
Positec Australia Pty Limited
10 Corporate Blvd Bayswater , VIC 3153, Australia