Worx WG284E, Инструкция по безопасности и эксплуатации, Страница: 10 / 16

Cordless Hedge Trimmer
WG284E WG284E.X
10
2.
COMPONENT LIST
1. ROTATING REAR HANDLE
2. BATTERY PACK*
3. FRONT HANDLE
4. FRONT SWITCH LEVER
(All Around Switch Function)
5. SAFETY GUARD
6. BLADE
7. BLADE SHEATH
8. LOCKING SWITCH FOR ROTATING
9. REAR SWITCH LEVER
10. BATTERY PACK RELEASE BUTTON* (See Fig.
G1)
*Not all the accessories illustrated or described
are included in standard delivery.
3. TECHNICAL DATA
Type WG284E WG284E.X (250-299- designation
of machinery, representative of cordless hedge
trimmer)
WG284E WG284E.X **
Voltage 40V MAX (2x20V MAX.)***
No-load speed 2200 /min
Blade length 66 cm
Cutting length 60 cm
Tooth spacing 35 mm
Max cutting diameter 27 mm
Machine Weight
(
Bare
Tool)
3.5 kg
** X=1-999
,
A-Z
,
M1-M9 there are only used for
different customers, there are no safe relevant
changes between these models
.
*** Voltage measured without workload. Initial
battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.
SUGGESTED BATTERIES AND
CHARGERS
Category
Type Capacity
20V Battery
WA3551 2.0 Ah
WA3551.1 2.0 Ah
WA3553 4.0 Ah
20V Charger
WA3760 0.4 A
WA3880 2.0 A
WA3883 4.0 A
WA3772 2.0 A
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to
the accessory packaging for further details. Store
personnel can assist you and offer advice.
NOISE INFORMATION
A weighted sound pressure
L
pA
: 77.2 dB(A)
K
pA
= 3 dB(A)
A weighted sound power
L
wA
: 93.1 dB(A)
K
wA
= 3 dB(A)
Wear ear protection
VIBRATION INFORMATION
Vibration total values (triax vector sum)
determined according to EN 62841:
Vibration emission value: a
h
< 1.5 m/s²
Uncertainty K = 1.5m/s²
The declared vibration total value and the declared
noise emission value have been measured in
accordance with a standard test method and may be
used for comparing one tool with another.
The declared vibration total value and the declared
noise emission value may also be used in a
preliminary assessment of exposure.
WARNING: The vibration and noise emissions
during actual use of the power tool can differ
from the declared value depending on the ways in
which the tool is used especially what kind of