Worx WG150E Скачать руководство пользователя страница 9

9

8

Cordless Grass Trimmer               ENG

9

8

reduce  the  risk  of  starting  the  power  tool 
accidentally.

d) Store idle power tools out of the reach 

of  children  and  do  not  allow  persons 

unfamiliar with the power tool or these 

instructions to operate the power tool.

 

Power tools are dangerous in the hands of 
untrained users.

e)  Maintain  power  tools.  Check  for 

misalignment  or  binding  of  moving 

parts, breakage of parts and any other 

condition  that  may  affect  the  power 

tools  operation.  If  damaged,  have  the 

power  tool  repaired  before  use.

  Many 

accidents are caused by poorly maintained 
power tools.

f)  Keep  cutting  tools  sharp  and  clean.

 

Properly maintained cutting tools with sharp 
cutting edges are less likely to bind and are 
easier to control.

g)  Use  the  power  tool,  accessories  and 

tool  bits  etc.,  in  accordance  with 

these  instructions  and  in  the  manner 

intended  for  the  particular  type  of 

power  tool,  taking  into  account  the 

working  conditions  and  the  work  to 

be  performed.

  Use  of  the  power  tool  for 

operations  different  from  intended  could 
result in a hazardous situation.

5. BATTERY TOOL USE AND CARE

a)  Ensure the switch is in the off position 

before inserting battery pack.

 Inserting 

the battery pack into power tools that have 
the switch on invites accidents.

b)  Recharge  only  with  the  charger 

specified by the manufacturer.

 A charger 

that is suitable for one type of battery pack 
may  create  a  risk  of  fire  when  used  with 
another battery pack.

c) Use power tools only with specifically 

designated  battery  packs.

  Use  of  any 

other  battery  packs  may  create  a  risk  of 
injury and fire.

d)  When battery pack is not in use, keep 

it  away  from  other  metal  objects  like 

paper clips, coins, keys, nails, screws, 

or  other  small  metal  objects  that  can 

make  a  connection  from  one  terminal 

to  another.

 Shorting the battery terminals 

together may cause burns or a fire.

e) Under  abusive  conditions,  liquid  may 

be  ejected  from  the  battery;  avoid 

contact. If contact accidentally occurs, 

flush  with  water.  If  liquid  contacts 

eyes,  additionally  seek  medical  help.

 

Liquid  ejected  from  the  battery  may  cause 
irritation or burns.

6. SERVICE

a) Have  your  power  tool  serviced  by 

a  qualified  repair  person  using  only 

identical  replacement  parts.

  This  will 

ensure  that  the  safety  of  the  power  tool  is 
maintained.

ADDITIONAL SAFETY 

INSTRUCTION FOR 

THE CORDLESS GRASS 

TRIMMER

1.   Wear protective glasses or goggles.
2.  Never  allow  children  or  people  unfamiliar 

with the instructions to use the machine.

3.  Stop  using  the  machine  while  people, 

especially children, or pets are nearby.

4.  Only  use  the  machine  in  daylight  or  good 

artificial light.

5.  Before  using  the  machine  and  after  any 

impact, check for signs of wear or damage 
and repair as necessary. 

6.  Never  operate  the  machine  with  damaged 

guards or without the guards in place.

7.   Keep hands and feet away from the cutting 

means  at  all  times  and  especially  when 
switching on the motor.

8.  Take  care  against  injury  from  any  device 

fitted for trimming the filament line length. 
After extending new cutter line always return 
the machine to its normal operating position 
before switching on.

9.  Never fit metal cutting elements.
10. Never use replacement parts or accessories 

not  provided  or  recommended  by  the 
manufacturer.

11. Disconnect  the  machine  from  the  mains 

before checking, cleaning or working on the 
machine and when it is not in use.

12. Always ensure that ventilation openings are 

kept clear of debris.

CRA-WG150E-M-061102.indd   9

2007-3-28   17:11:02

Содержание WG150E

















Отзывы: