Worx WG115E, Инструкция по безопасности и эксплуатации, Страница: 8 / 16

8
Electric Grass Trimmer
WG115E
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
INTENDED USE
The machine is intended for the cutting of grass and
weeds under bushes, as well as on slopes and edges
that can not be reached with the lawn mower.
ASSEMBLY
WARNING!
The guard must always be on the
tool to protect the user.
To avoid injury from unexpected starting or
electrical shock during assembly or
adjustment, do not plug the power cord into a
source of power.
1. ASSEMBLING THE TRIMMER SHAFT (See Fig.
A)
First make sure the cable is not twisted.
Locate the Lower Shaft (5) into the Upper Shaft (4).
Grasp both the Lower and Upper Shafts and Push
firmly together until a click can be heard.
NOTE:
Once the Upper and Lower Shaft is assembled it
can not be disassembled.
Ensure internal cable is not trapped or twisted.
2. FITTING THE GUARD (See Fig. B1, B2)
Attach the Safety Guard (6) to the trimmer head making
sure the sides are located into the grooves (See Fig.
B1).
Secure the safety guard onto the trimmer head with the
screw (a) provided (See Fig. B2).
WARNING! Take great care when doing this
as the guard has a very sharp cutting edge
(See Fig. B3).
Never operate the tool without the guard
properly in place. Use of the unit without having
installed the guard will cause the motor to
overheat, and void the warranty.
a
1
2
3 3
Click
A
B1
B2
B3