Worx WG115E, Инструкция по безопасности и эксплуатации, Страница: 3 / 16

3
Electric Grass Trimmer
WG115E WG115E
PRODUCT SAFETY
GENERAL SAFETY
WARNINGS
WARNING! Read all safety warnings
and all instructions.
Failure to follow
the warnings and instructions may result in
electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND
INSTRUCTIONS FOR FUTURE
REFERENCE.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order to
avoid a hazard.
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
Safe operating practices
1. Training
a) Read the instructions carefully. Be familiar
with the controls and the correct use of the
machine.
b) Never allow children, persons with reduced
physical, sensory or mental capabilities
or lack of experience and knowledge or
people unfamiliar with these instructions
to use the machine, local regulations may
restrict the age of the operator.
c) Keep in mind that the operator or user
is responsible for accidents or hazards
occurring to other people or their property.
2. Preparation
a) Before use check the supply and extension
cord for signs of damage or aging. If
the cord becomes damaged during use,
disconnect the cord from the supply
immediately. DO NOT TOUCH THE CORD
BEFORE DISCONNECTING THE SUPPLY. Do
not use the machine if the cord is damaged
or worn.
b) Keep extension cords away from moving
hazardous parts to avoid damages to the
cords which can lead to contact with live
parts.
c) Before use, always visually inspect
the machine for damaged, missing or
misplaced guards or shields.
d) Never operate the machine while people,
especially children, or pets are nearby.
3. Operation
a) Keep supply and extension cords away
from cutting means.
b) Wear eye protection, long trousers and
stout shoes at all times while operating the
machine.
c) Avoid using the machine in bad weather
conditions especially when there is a risk of
lightning.
d) Use the machine only in daylight or good
artificial light.
e) Never operate the machine with damaged
guards or shields or without guards or
shields in place.
f) Switch on the motor only when the hands
and feet are away from the cutting means.
g) Always disconnect the machine from the
power supply (e.g. remove the plug from
the mains)
1) Whenever the machine is left unattended;
2) Before clearing a blockage;
3) Before checking, cleaning or working on
the machine;
4) After striking a foreign object;
5) Whenever the machine starts vibrating
abnormally.
h) Take care against injury to feet and hands
from the cutting means.
i) Always ensure that the ventilation
openings are kept clear of debris.
j) Never fit metal cutting elements.
k) Always be sure of your footing on slopes.
l) Walk, never run.
m) Not overreach and keep the balance at all
times.
n) Not to touch moving hazardous parts
before the machine is disconnected from
the mains and the moving hazardous parts
have come to a complete stop.
4. Maintenance and storage
a) Disconnect the machine from the power
supply (e.g. remove the plug from the
mains) before carrying out maintenance or
cleaning work.
b) Use only the manufacturer’s recommended
replacement parts and accessories.
c) Inspect and maintain the machine
regularly. Have the machine repaired only
by an authorized repairer.
d) When not in use, store the machine out of
the reach of children.
5. Recommendation
The machine should be supplied via a residual
current device (RCD) with a tripping current of
not more than 30 mA.