Getting started
EN
7
INSTALLATION
Installing the ACS accessory is straightforward. Landroid automatically recognizes the new module and behaves accordingly - no manual
settings needed. Once the ACS module is correctly installed, it’s displayed both on the app’s home screen or on Landroid’s display.
Here below the steps to follow to install ACS into different Landroid models.
Before proceeding with the installation please make sure your Landroid’s firmware is updated to the last version. For more information on
firmware upgrade please refer to the “Maintenance” section of the Landroid-o-pedia (https://support.worx-europe.com).
1.
Turn off Landroid
2
. Use a screwdriver to remove the cover
3.
Remove Landroid connector’s inner protection
4.
Plug ACS connectors into Landroid’s connectors
5
. Insert ACS into the slot
6.
Arrange cables and connectors tidily
(as shown in the image)
4
3
5
6
OK
START
SET
1
2
Landroid S 300 (WR130E)
