Cordless Drill / Driver
EN
9
medical help.
Liquid ejected from the
battery may cause irritation or burns.
6. SERVICE
a) Have your power tool serviced by
a qualified repair person using only
identical replacement parts.
This will
ensure that the safety of the power tool is
maintained.
DRILL SAFETY WARNINGS
1. Use auxiliary handle(s), if supplied
with the tool.
Loss of control can cause
personal injury.
2. Hold power tool by insulated
gripping surfaces, when performing
an operation where the cutting
accessory may contact hidden
wiring.
Cutting accessory contacting a
“live” wire may make exposed metal parts
of the power tool “live” and could give the
operator an electric shock.
GENERAL SAFETY
WARNINGS FOR BATTERY
PACK
1) WARNING: Risk of fire and burns. Do
not disassemble, heat above 100°C
(212°F), or incinerate. Do not expose
cells or batteries to heat or fire.
Avoid storage in direct sunlight.
2) Dispose of used battery promptly..
When disposing of secondary cells
or batteries, keep cells or batteries
of different electrochemical systems
separate from each other.
3) Keep battery out of reach of children
and in original package until ready to
use.
4) Never put batteries in mouth. If
swallowed, contact your physician or
local poison control center.
5) CAUTION – The battery used in this
device may present a risk of fire or
chemical burn if mistreated. Replace
battery with ( WORX) only. Use of
another battery may present a risk of
fire or explosion.
6) WARNING: Do not use a visibly
damaged battery pack or appliance
as applicable.
7) WARNING: Do not modify or attempt
to repair the appliance or the battery
pack as applicable.
8) BATTERY MUST BE RECYCLED
9) Do not short-circuit a cell or battery.
Do not store cells or batteries
haphazardly in a box or drawer where
they may short-circuit each other
or be short-circuited by conductive
materials.
10) Do not subject cells or batteries to
mechanical shock.
11) Keep cells and batteries clean and
dry.
Wipe the cell or battery terminals
with a clean dry cloth if they become dirty.
12) Do not maintain secondary cells and
batteries on charge when not in use.
13) Retain the original cell and battery
literature for future reference.
14) Do not use any charger other than
that specifically provided for use with
the equipment. Secondary cells and
batteries need to be charged before
use.
Always use the correct charger and
refer to the manufacturer’s instructions
or equipment manual for proper charging
instructions.
15) When possible, remove the battery from
the equipment when not in use.
16) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to battery pack, picking up
or carrying the appliance. Carrying the
appliance with your finger on the switch or
energizing appliance that have the switch
on invites accidents.
17) Disconnect the battery pack from
the appliance before making any
adjustments, changing accessories, or
storing appliance. Such preventive safety
measures reduce the risk of starting the
appliance accidentally.
Содержание SWITCHDRIVER WX176L
Страница 2: ...6 1 9 2 10 8 3 4 7 5 ...
Страница 3: ...2 3 1 3 1 1 2 2 2 2 1 D C E2 E1 B A3 A2 A1 ...
Страница 4: ... 10 9 8 7 6 5 4 3 2 1 11 E2 E1 F E3 H G ...