background image

11

Oscillating tool 

WX678 WX678.9

tool. Wipe clean with a dry cloth. Always store your power tool in a dry place. Keep the motor 

ventilation slots clean. Keep all working controls free of dust. Occasionally you may see sparks 
through the ventilation slots. This is normal and will not damage your power tool.        

 

APPLICATION

WArning: The sawing teeth are very sharp. do not touch during mounting 

and application. 

The workpiece must be clamped tightly before it is cut.

pic

description

Application

sawing

Universal Metal/Wood End 

Cut Blade

Wood, plastic, fiberglass, 

nails, non-ferrous metals, thin 

sheet metal, hardened fillers

Standard Wood End Cut 

Blade

Wood, plastic, drywall

Precision Wood Cut Blade

Wood, soft plastics

HSS Semicircle Saw Blade

Thin wood, plastic, fiberglass, 

non-ferrous metals, thin 

sheet metal, hardened fillers, 

window glazing

sanding

Sanding Pad (Perforated)

Wood, plastic, hardened 

fillers

Sanding Finger Pad

Wood, plastic, hardened 

fillers

rasping

Triangular Carbide Grit Rasp

Wood, hardened adhesives,  

thin set, masonry

Carbide Rasp (Finger 

Shaped)

Wood, hardened adhesives, 

thin set, masonry

removing 

grout

Carbide Grit Semicircle Saw 

Blade

Grout, porous concrete, masonry

Diamond-Coated Semicircle 

Saw Blade

Ceramic and stone tile, 

backerboard

Содержание Sonicrafter WX678

















Отзывы: