9
ORBITAL SANDING
Your sander operates in small circular rotations which allows efficient
material removal.
Operate your sander in long sweeping movements across your
workpiece and even across the grain. For a finer finish, always use a
fine grain sandpaper and only move the sander in the direction of the
grain and never across the grain.
Do not allow your sander to remain in the same position otherwise
you will remove material and create and uneven surface.
8
attachment system to allow quick and easy changing of the sanding
and polishing accessories. Remove any dust or other objects from
the hook and loop on the baseplate and sanding paper. Position the
sanding paper evenly on the baseplate and firmly press down to
attach them together. If the sanding paperhas dust extraction holes
you must align these with the holes in the baseplate, otherwise the
dust extraction will not function. To remove the sanding paper lift one
corner of the paper and pull it off from the baseplate (See B.2).
PAPER PUNCH
If using sanding paper without dust holes, use the paper punch (7)
to perforate the holes to ensure correct dust extraction. Position the
punch over the base-plate (8) with the punch sides on the edges of
the base-plate (see C). Press the punch into the base-plate to punch
holes into the sanding paper. Then remove the punch and check all
the holes have been formed correctly.
DUST BAG
Always operate your sander with the dust bag fitted. For the best
performance always empty the dust bag in time. Open the zip and
empty the dust from the bag. To remove the bag ,slide the mounting
bracket out and away from the sander ( (See D). To refit the bag,
firmly push the mounting bracket into the location on the sander
housing (See E).
For best performance always empty the dust bag when it is half full.
FLUSH SANDING FACILITY
Your sander can sand flush on three sides of the base-plate which
allows easy access to corners and edges of moulding (see F).
5
6
7
