Worx Professional WU326P, Руководство пользователя

Страница: 8 / 16

8
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
Action Figure
Inserting bits
Clean and lightly grease the bit with
the oil provided before inserting. Insert
the dust-free bit into the bit holder with
a twisting motion until it latches. The
bit locks itself. Check the locking by
pulling on the tool.
WARNING: Take care that the
dust protection cap is not
damaged when changing tools.
See Fig. A
Removing bits
Retract back the bit holder locking
sleeve (2) and pull out the bit.
WARNING: Your new WORX
Rotary Hammer generates
powerful forces to get your job done
quickly and effectively. These forces
may cause inferior quality SDS bits
to break and jam in the chuck. We
therefore recommend that only high
quality SDS bits be used with this
tool.
See Fig. B
Adjusting the auxiliary handle
WARNING: Always use the
auxiliary handle.
See Fig. C
Operation
Function mode selection See Fig. D
On/off switch See Fig. E
Replacing the brushes See Fig. F
Function mode selection
The operation of the gearbox for each application is set
with the function mode selection switch (3). To change
between functions, depress the unlocking button (4) and
rotate the selector to the desired operating mode.
Function WU326P
For drilling of concrete or
masonry.
For chiseling.
WARNING: The operating mode selector switch
may be actuated only at a standstill.
MAINTENANCE
Remove the plug from the socket before carrying out
any adjustment, servicing or maintenance.
There are no user serviceable parts in your power tool.
Never use water or chemical cleaners to clean your
power tool. Wipe clean with a dry cloth. Always store
your power tool in a dry place. Keep the motor ventila-
tion slots clean. Keep all working controls free of dust.
Occasionally you may see sparks through the ventilation
slots. This is normal and will not damage your power
tool.
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
ENVIRONMENTAL
PROTECTION
Disposal
The machine, its accessories and packaging
materials should be sorted for environmen-
tally friendly recycling.
The plastic components are labeled for
categorized recycling.