Worx Professional Versacut WU420, Руководство пользователя

Страница: 9 / 58

9
1
2
3
4
c) When restarting a saw in the workpiece, center the saw
blade in the kerf and check that saw teeth are not engaged
into the material.
If saw blade is binding, it may walk up or
kickback from the workpiece as the saw is restarted.
d) Support large panels to minimize the risk of blade pinching
and kickback.
Large panels tend to sag under their own weight.
Supports must be placed under the panel on both sides, near the
line of cut and near the edge of the panel.
e) Do not use dull or damaged blades.
Unsharpened or
improperly set blades produce narrow kerf causing excessive
friction, blade binding and kickback.
f) Blade depth and bevel adjusting locking levers must be
tight and secure before making cut.
If blade adjustment shifts
while cutting, it may cause binding and kickback.
g) Use extra caution when making a “plunge cut” into
existing walls or other blind areas.
The protruding blade may
cut objects that can cause kickback.
Safety instructions for plunge-
type saw
Guard function
a) Check guard for proper closing before each use. Do not
operate the saw if guard does not move freely and enclose
the blade instantly. Never clamp or tie the guard with the
blade exposed.
If saw is accidentally dropped, guard may be bent.
Check to make sure that guard moves freely and does not touch the
blade or any other part, in all angles and depths of cut.
b) Check the operation and condition of the guard return spring. If
the guard and the spring are not operating properly, they must be
serviced before use.
Guard may operate sluggishly due to damaged
parts, gummy deposits, or a build-up of debris.
c) Assure that the guide plate of the saw will not shift while
performing the “plunge cut” when the blade bevel setting is not
at 90°.
Blade shifting sideways will cause binding and likely kick back.
d) Always observe that the guard is covering the blade before
placing saw down on bench or floor.
An unprotected, coasting
blade will cause the saw to walk backwards, cutting whatever is
in its path. Be aware of the time it takes for the blade to stop after
switch is released.
Additional safety rules for your
circular saw
Always wear a dust mask, hearing protection and eye protection.
Only use saw blades recommended in the specification.
Do not use any abrasive wheels.
Use only blade diameter(s) in accordance with the markings.
General Safety Warnings for your
Laser
Warning: Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in serious
injury.