Worx Nitro WX102, Инструкция по безопасности и эксплуатации. Оригинальные инструкции.

Страница: 13 / 16

13
20V Cordless Drill Driver EN
2. THE DRILL STOPS BEFORE THE SCREW IS
COMPLETELY TIGHTENED. WHY?
:IVMJ]XLIXSVUYITSWMXMSRSJXLIXSVUYIEHNYWXMRKVMRK*MRH
XLIXSVUYIEHNYWXMRKVMRKFIX[IIRXLIGLYGOERHXLIHVMPP
body. Position 1 is the lowest torque (screw driving force)
and position 18 is the highest torque (screw driving force).
Position
MWJSVHVMPPSTIVEXMSR6IKYPEXIXLIXSVUYIEHNYWXMRK
ring to a higher position to reach the best result.
3. REASONS FOR DIFFERENT BATTERY PACK WORKING
TIMES
Charging time problems, as above, and having not used a
battery pack for a prolonged time will reduce the battery pack
working time. This can be corrected after several charge and
discharge operations by charging & working with your drill.
Heavy working conditions such as large screws into hard
wood will use up the battery pack energy faster than lighter
working conditions. Do not re-charge your battery pack below
0
o
C and above 40
o
C as this will affect performance.
MAINTENANCE
6IQSZIXLIFEXXIV]TEGOJVSQXLIXSSPFIJSVIGEVV]MRK
out any adjustment, servicing or maintenance.
Your tool requires no additional lubrication or maintenance.
There are no user serviceable parts in your power tool. Never
use water or chemical cleaners to clean your power tool.
Wipe clean with a dry cloth. Always store your power tool
in a dry place. Keep the motor ventilation slots clean. Keep
all working controls free of dust. Occasionally you may see
sparks through the ventilation slots. This is normal and will
not damage your power tool.
FOR BATTERY TOOLS
The ambient temperature range for the use and
storage of tool and battery is 0
0
C-45
0
C.
The recommended ambient temperature range for
the charging system during charging is 0
0
C-40
0
C.
ENVIRONMENTAL PROTECTION
Waste electrical products must not be disposed
of with household waste. Please recycle where
facilities exist. Check with your local authorities or
retailer for recycling advice.
Positec Australia Pty Limited
10 Corporate Blvd Bayswater , VIC 3153, Australia
DECLARATION OF
CONFORMITY
We,
Positec Germany GmbH
Postfach 32 02 16, 50796 Cologne, Germany
On behalf of Positec declare that the product
Description Cordless Drill Driver
Type
;<;<<HIWMKREXMSRSJQEGLMRIV]
representative of Cordless Drill)
Function
(VMPPMRKXMKLXIRMRKERHPSSWIRMRKWGVI[WRYXW
Complies with the following Directives:
2006/42/EC
)9)9
2014/30/EU
Standards conform to
)2)2)2
)2
8LITIVWSREYXLSVM^IHXSGSQTMPIXLIXIGLRMGEPƼPI
2EQI1EVGIP*MP^
Address Positec Germany GmbH
4SWXJEGL'IVQER]
Allen Ding
(ITYX]'LMIJ)RKMRIIV8IWXMRK'IVXMƼGEXMSR
Positec Technology (China) Co., Ltd
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China