Worldwel Longrun 200LD, Руководство по эксплуатации

Страница: 8 / 23

1 Ammeter Indicates the welding current.
2 Power Lamp
It indicates that the machine is on and input voltage is within acceptable
range.
3 Current Lamp It indicates the machine is ready to adjust welding current.
4 Warning Lamp
It indicates the thermal over load or output disabled by any electrical
problems or the failure of program. When it is on, the machine will not
supply power at the output.
5 Power Switch
When it is turn on, the cooling fan and all of electrical circuit inside the
machine will be operated.
6 Control Fuse (5A) It will be broken by any electrical problems
7 Current Volume Adjust the welding current
8 Electric shock prevention device
ESPD (electric shock prevention function) is to prevent user's electric
shock by cutting off short-circuit voltage is after welding is finished.
9 ESPD Lamp It indicates ESPD function is on
10 Arc Force Lamp It indicates Arc force function is on
11 Hot start Lamp It indicates Hot start function is on
12 Arc force / Hot start Volume
You can change Arc force / Hot start function by pressing knob.
And also, you can adjust arc force range / Hot start current by knob.
13 Arc force volume Adjust the Arc force
14 Pulse current Adjust the Pulse current
15 Pulse frequency Adjust the Pulse frequency
16 Pulse select button You can choose Pulse/Non Pulse mode