Worldlawn WYRZ42S, Руководство оператора

Страница: 6 / 19

2
8352
3. Installing Bagger
3.1 Unpacking
1)
Open crate.
2)
Remove loose parts (i.e., operator’s manual, etc)
from crate.
3)
Remove unit from crate, check crate thoroughly
for loose parts.
3.2 Install Blade and Deck Discharge Tube
1)
Remove chute and torsion spring (4, 5) from the
mower deck. Keep removed parts in a bag for later
use. Install deck discharge with bolts, washers and
nuts (6, 7, 8) (FIG 1)
a)
FIG 1
2)
Install the deck discharge tube. Place slot on
outside edge of deck discharge tube (350) over
welded tab on outside edge of mower deck. Line
up top bracket holes of deck discharge tube with
holes in tabs welded to top of deck discharge.
Insert bolt 6, add washer and nut (7, 8) and tighten
securely. Install bolt 107, add washer and nut (72,
73) and tighten securely. (FIG 2)
FIG 2
3.3 Install Lower Frame/Bag Base Frame
Insert pin of lower frame weldment (314) into center of
the rear bumper of the machine. Install bolts (81),
spacers (351), nuts and washers (73, 17) on lower frame
and bumper. Attach part bag base frame weldment (315)
to hold the upper frame in a vertical position, aligning
the slots in the upper frame with the formed tabs in the
lower frame. Slide upper frame over the tabs then swing
the frame down to a horizontal position. Secure the
frame with the center gusset tube (316) using bolts
(147), washers and nuts. (73, 17)