Worldlawn WY33N11BS Скачать руководство пользователя страница 4

 

Safety Information

 

 

1

 

     

         

  RULES FOR SAFE OPERATION 

                                 

    LOOK FOR THIS SYMBOL TO POINT OUT IMPORTANT 

                           SAFETY PRECAUTIONS. IT MEANS ATTENTION! 
                                                        BECOME ALERT! YOUR SAFETY IS INVOLVED. 

EQUIPMENT SAFETY AND TRAINING 

 

READ the OPERATOR’S 

Manual Carefully. Be 

thoroughly familiar with the controls and the proper use of 
the Mower. 

 NEVER 

allow children to operate or ride on the Mower. 

Do not allow adults to operate the Mower without proper 
instruction. 

 

KEEP

 the area of operation clear of all by standers, 

particularly small children and pets. 

 

DO NOT

 operate the Mower if under the influence of 

alcohol, medication or when tired or ill. 

PREPARATION TO MOW 

 

THOROUGHLY

 inspect the area where the Mower is to 

be used and remove all stones, sticks, wires, bones and other 
foreign objects. 

 

DO NOT 

operate the Mower when barefoot or wearing 

open sandals. Always wear appropriate footwear. 

 

CHECK

 the fuel before starting the engine. Do not fill the 

Gasoline Tank indoors or when the Engine is running .Wait 
until the Engine has cooled for several minutes after running. 
Clean off any spilled gasoline before starting the engine. 

 

KEEP 

the Blade Drive Lever in the disengaged position and 

shift the Transmission into neutral before starting the engine. 
Never make a height adjustment or any Mower adjustment 
while the engine is running. 

 

NEVER

 operate the Mower in wet grass. Always be sure 

of your footing; keep a firm hold on the handles and walk; 
never run. 

OPERATING THE MOWER 

 

ALWAYS

 wear safety goggles or safety glasses with side 

shields when operating the Mower. 

 

DO NOT

 change the Engine Governor setting or over 

speed the engine. 

 

DO NOT

 put hands or feet near or under rotating parts. 

Keep clear of the discharge opening at all times.   

 

TEST

 the operation of Blade Drive Lever before each use. 

If Blades rotate longer than three seconds after the controls 
are disengaged, stop the Engine and immediately contact 
your local Worldlawn authorized dealer or call the factory 
for instructions. 

DO NOT

 use the Mower until the 

mechanism is repaired. 

 

MAKING TURNS

 :The Mower turns easily by squeezing 

the right of left lever. 

 

WATCH

 for traffic and 

STOP

 the Mower Blade when 

crossing gravel drives, walks or roadways. 

 

MOW

 only in daylight or in good artificial light. 

Always run the Engine at the fast speed setting for best 
mowing performance. 

 

STOP

 the Engine, after striking a foreign object, 

disconnect the spark plug wire, thoroughly inspect the 
Mower for any damage and repair the damage before 
restarting and operating the Mower. 
If the Mower should start to vibrate abnormally, 

STOP

 the 

Engine, disconnect the spark plug wire, and check 
immediately for the cause. Vibration is generally a warning 
of trouble. 

 

STOP 

the Engine whenever you leave the Mower, or 

during cleaning, repairing or inspecting. Make certain the 
Blades and all moving parts have stopped. Disconnect the 
spark plug wire, and keep the wire away from the plug to 
prevent accidental starting. 

 

MOW

 across the face of slopes; never up and down. 

Exercise extreme caution when changing direction on slopes. 
Do not mow on slopes (with an incline of more than 15°).   
Exceeding the maximum safe operating angle may cause 
tipping and loss of Mower control. 

 

ALWAYS

 mow with all Covers in place and the Discharge 

Chute in the down position except if an optional Grass 
Catcher is completely installed. 

 

DO NOT

 touch Engine parts which may be hot from 

operation. Allow parts to cool completely before inspecting, 
cleaning, adjusting, refueling or repairing the Mower. 

 

Shut off the Fuel Valve at the bottom of the Tank 

before transporting the Mower on a trailer, FIG10

Failure to do so may cause flooding of the Carburetor due to 
road vibration. 

 

USE THE FOLLOWING MAINTENANCE 
PROCEDURES TO KEEP YOUR MOWER IN 
GOOD OPERATING CONDITION 

MAINTENANCE AND STORAGE 

 

CHECK

 the Blade and Engine Mounting Bolts at frequent 

intervals for proper tightness. 

 

KEEP

 all Nuts, Bolts and Screws tight to be sure the 

equipment is in safe working condition. 

 

NEVER

 store the Mower with gasoline in the Tank inside 

a building where fumes may reach an open flame or spark. 
Allow the Engine to cool before storing in any enclosure. 
Store gasoline in a cool, well vented area, and only in an 
approved container. 

 

Keep 

MOWER

 Blades sharp. Use Caution, wear gloves 

and eye protection when servicing and sharpening Blades. 
To reduce fire hazard, keep the engine free of grass, leaves, 
debris and grease. 

Содержание WY33N11BS

















Отзывы: