Worldlawn WY33N11BS, Руководство оператора

Страница: 10 / 16

Adjustments & Repairs
7
and Flat Washer, FIG 14. To raise height of cut, lower Caster
Wheel Yoke 3-4”, lift off Spacer from top and place on the
underside of the Caster Wheel Bracket.
2. Rotate the Spacer to align with flat in the Yoke Shaft and
slide the Spacer onto the shaft.
3. No Spacer at the bottom reflects a cutting height of 1-1/2”.
Each spacer added to or removed from the bottom will adjust
the cutting height 1/2”. Reinstall Flat Washer and inchpin,
remove blocking.
4. Make sure the number of Spacers are positioned the same
on both Caster Shafts.
Fuel
Shut Off
Vavle
Rear Wheel Height
Adjusting Handle
Transmission
Drain Port
FIG 15 Rear Wheel Height Adjustment
5. To adjust the Rear Wheel settings refer to FIG 11. Loosen
both height adjusting T-Bolts. Unlock the Rear Wheel
Height Adjusting Handle FIG 15. Rotate the Handle
clockwise to raise and counterclockwise to lower the Rear
Wheels. Align the pointer on the register mark which
corresponds with the number of Caster Spacers on the
bottom of the Caster Wheel Bracket.
6. Reinstall all parts in proper order.
CUTTING HEIGHT ADJUSTMENT CHART
Cutting Height # Spacer below Cutting Height
desired Caster pivot Scale
1-1/2” 0 Front mark
2” 1 2
nd
mark
2-1/2” 2 3
rd
mark
3” 3 4
th
mark
3-1/2” 4 5
th
mark
4” 5 6
th
mark