Page 8
Assembly Steps
Anti Tip Kit Installation Instruction:
2x
BACK SIDE
THE WALL
B
A
WARNING
Serious or fatal crushing injuries can occur
from furniture tip-over. To help prevent
tip-over:
Install tipover restraint provided.
Place heaviest items in the lowest drawers.
Do not set TV's or other heavy objects on top
of this product, unless the product is
specifically designed to accommodate them.
Never allow children to climb or hang on
drawers, doors, or shelves.
Never open more than one drawer at a time.
Use of tip-over restraints may only reduce,
but not eliminate, the risk of tip over.
2 ''
0.6''
1. Attach mounting brackets (05) securely near the back edges of the furniture piece with the short
screw (02). Refer to picture B.
2. Determine the final position of the furniture piece. Mark location on the wall approximately 2"
below the brackets mounted to the back of the furniture.
3. Drill starter holes into the wall stud. If wall stud is not available, drill a hole (dia 6mm) into
the wall and insert plastic anchor (04). Gently tap anchor until the flange of the anchor is flush
with the wall.
4. Attach the wall brackets (05) by inserting and securing the long screw (03) to the wall. Refer to
picture B to align the two brackets.
5. Insert the plastic strap (01) through both brackets and tighten until snug.
6. Check to ensure the brackets are firmly installed and the straps are secured.
2"
1
2
5
5
3
