Assembly Steps
Installation Instruction
:
Attach one of the mounting brackets securely near the top back edge of the furniture piece
by inserting the screw.Refer to picture A.
Determine the final position of the furniture piece. Mark location on the wall approximately
2” below the bracket mounted to the back of the furniture.
Drill a starter hole into the wall stud. If wall stud is not available, drill a hole into the wall
and insert plastic anchor. Gently tap anchor until the flange of the anchor is flush with the wall.
Attach the second bracket by inserting and securing the screw to the wall. Refer to picture B.
Align the two brackets.
Insert the strap through both brackets and tighten until snug.
Check to make sure that the brackets are firmly installed the strap is secure.
BACK SIDE
A
B
THE WALL
2x
2x
03
04
02
01
Page 6
0.5"
