World Cat 2010 230SF, Руководство пользователя

Страница: 29 / 50

World Cat
3-8
ACCESSORIES
Electrical accessories include all lights, pumps, and gauges assembled into your catamaran. Certain accessories
are standard to each model, while others are optional equipment. Below is a list of accessories and their function.
Beside each accessory is a list of the boats on which the item is standard. For information on optional equipment see
Chapter 5 in this manual.
NAVAGATIONAL LIGHTS (ALL)
Per USCG guidelines, all powered vessels must have navigational and anchor lights. Every World Cat is
equipped with navigational lights at the bow, a pole light near the stern, or mast light on the hardtop. These
lights must be used in accordance with USCG regulations when anchored or underway.
COCKPIT LIGHTS (ALL)
Activated by the digital control system, cockpit lights are located at floor level and in boxes to provide light
while operating in low light conditions,
CABIN / CONSOLE LIGHTS (ALL)
Lights located in the cabin or in consoles have an integrated power switch and are tied directly into the fuse
block. Operate them with the switch located at the base of the light.
SPREADER LIGHTS (HARDTOP OPTION ONLY)
Attached to the hardtop or hardtop frame, spreader lights illuminate the cockpit in low light situations. They
are operated using the switch on the dome light and are protected by the fuse block in the hardtop radio box.
DOME LIGHT (HARDTOP OPTION ONLY)
Located under the hardtop radio box, this light features both white and red lamps for nighttime operation. It is
powered by the fuse block located in the radio box.
BILGE PUMP / FLOAT SWITCH (ALL)
Bilge Pumps evacuate standing water in the bilge. They can be operated manual from the switch pod, or auto-
matically by the float switch. The float switches are connected to the fuses along the top of the battery manage-
ment panel.
RAW WATER PUMP (ALL)
Supplies pressure to the raw water system. It is activated by the switch pod and contains a pressure switch sim-
ilar to a residential well pump. You can leave this appliance on at all times while underway.
FRESHWATER PUMP (ALL)
Supplies pressure to the freshwater system. It is activated by the switch pod and contains a pressure switch
similar to a residential well pump. You can leave this appliance on at all times while underway.
LIVEWELL PUMP (ALL EXCEPT 270 LC)
Supplies water to the livewell system and is activated by the switch pod. Use the button as follows:
• Press one time for continuous operation,
• Press two times for a 3 min. “ON” / 3 min. “OFF” cycle
• Press three times for a 5 min. “ON” / 5 min. “OFF” cycle.