Workzone WB 16-2.0, Руководство пользователя, Страница: 30 / 35

Noise and vibration information
30
Noise and vibration information
The specified noise and vibration levels were determined in accordance with the
standards EN 60745-1, EN 60745-2-1 and EN 60745-2-2.
The specified vibration emission level was measured on the basis of a standardised
test procedure and can be used to compare power tools with one another.
The specified vibration emission value may also be used to initially assess the
impairment.
The declared values are noise emission values and therefore do not necessarily
represent safe values for the workplace at the same time. The correlation between
emission and immission levels cannot reliably provide for a conclusion as to whether
additional cautionary measures are necessary or not.
Factors that could affect the respective imission level present at the workplace involve
the specification of the work area, the surrounding area, the duration of exposure,
other noise sources etc.
You must also observe any divergences in national regulations with respect to per-
missible workplace levels. The aforementioned information does, however, allow the
user to better assess dangers and risks.
CAUTION!
Risk of injury due to vibrations!
While actually using the power tool, the vibration emission value
may differ from the specified value depending on how the power
tool is used.
− Define safety precautions to protect the user. The impairment
is assessed in consideration of actual conditions of use. At the
same time, all parts of the operating cycle must be accounted for,
i.e. including periods during which the power tool is switched off
and during which it is turned on, but not operating under load.
CAUTION!
Hearing loss!
Exposure to noise may result in loss of hearing.
− Only work with suitable ear protection.
− Persons nearby must also wear suitable ear protection.