Workzone WB 16-2.0, Руководство пользователя, Страница: 27 / 35

Troubleshooting
27
Troubleshooting
Some problems may be caused by minor faults that you can fix yourself. To do so,
follow the instructions in the following table.
If it is still not possible to resolve the problem with the cordless drill, contact the after
sales support. Do not in any case attempt to repair the cordless drill yourself.
Problem Possible cause Solution
1. The cordless
drill cannot be
started.
The rechargeable
battery does not have
enough power.
Recharge the rechargeable
battery 6 (see chapter “Charging
the rechargeable battery”).
The rechargeable
battery has not been
inserted properly.
Push the rechargeable battery all
the way into the rechargeable bat-
tery holder until the rechargeable
battery locks into place.
Right-handed/
left-handed rotation
selector 5 is in the
middle position.
Push the right-handed or
left-handed rotation selector all
the way in.
2. The rechargea-
ble battery does
not charge.
The rechargeable
battery has not been
inserted properly.
Push the rechargeable battery into
the charger
7
so that the con-
tacts of the rechargeable battery
extend into the charger. The re-
chargeable battery must lock into
the charger.
The mains plug has not
been inserted properly.
Check to make sure that the mains
plug is properly seated.
The socket has no
power.
Check the socket by connecting
another device.
The rechargeable bat-
tery or the charger is
defective.
Contact the After Sales Support.