Troubleshooting
24
AFTER SALES SUPPORT
24
GB
IRE
GB
0845 872 2740
IRE
019022605
Troubleshooting
Problem
Cause(s)
Solution
The rotary hammer
drill cannot be
started.
It is not connected to
the mains.
The plug is not
inserted in the
socket. The mains
plug or mains cord is
damaged.
Connect it to the mains. Insert the
plug into the socket.
Have a defective mains plug/
defective mains cord replaced by a
qualified workshop.
The tool does not fit
in the chuck.
Wrong tool/wrong
chuck.
Use the chuck
11
for inserting
masonry drill bits and chisels, the
clamping chuck
18
for metal drill
bits (see chapter “Inserting and
removing metal drill bits”).
The tool/chuck is not
rotating.
The selector switch
CHISELING/DRILLING
has not been set
correctly.
Turn the selector switch
CHISELING/
DRILLING
12
with the arrow mark to
the
symbol.
The drill bit does
not penetrate the
material to be drilled
into.
The hammer function
has been deactivated.
Wrong drill bit.
Turn the
HAMMER ON/OFF
4
switch
to the
symbol.
Use a masonry drill bit for hammer
drilling.
Use the clamping chuck
18
and
a metal drill bit when drilling into
metal. In this case, switch the
hammer function off.
The chisel is not
moved.
The hammer function
has been deactivated.
Turn the
HAMMER ON/OFF
4
switch
to the
symbol.
Attention! Be absolutely sure to
set the selector switch
CHISELING/
DRILLING
12
to the symbol.
The chisel will rotate. Chiseling mode has
not been selected.
Attention! Risk of kickback! Be
absolutely sure to set the selector
switch
CHISELING/DRILLING
12
to
the symbol.
Содержание PT 150601
Страница 4: ...1 2 3 4 5 6 10 11 12 13 15 B 14 7 8 9 A 4 GB IRE ...
Страница 5: ...16 D E C 17 18 5 GB IRE ...
