Workzone PT 150601, Руководство пользователя

Страница: 11 / 31

Safety
11
support@coreservice.co.uk
AFTER SALES SUPPORT
GB IRE
GB
0845 872 2740
IRE
019022605
d) Remove all adjusting tools or spanners before you switch the power tool
on. A tool or spanner in contact with a rotating part of the device may result in
injury.
e) Avoid an abnormal posture. Assume a stable position and keep your
balance at all times. This will allow you to have better control of the power
tool in the event of unexpected situations.
f) Wear suitable clothing. Do not wear any loose-fitting clothing or jewel-
lery. Keep your hair, clothing and gloves away from the moving parts.
Loose clothing, jewellery or long hair may get caught in the moving parts.
g) If you can attach dust extractors or collectors, make sure that they are
connected and used properly.
Using a dust extractor may reduce risks
associated with dust.
Using and handling the power tool
a)
Do not overload the device. Use the right power tool for your work.
The right power tool will ensure that you work more effectively and safely
within the specified power range.
b) Do not use a power tool if its switch is defective. A power tool that can no
longer be switched on or off is dangerous and must be repaired.
c)
Pull the plug out of the socket before you make any settings to the
device, change the accessories or put away the device.
This precaution
will prevent the power tool from accidentally starting.
d) Keep unused power tools out of the reach of children. Do not let persons
use the power tool if they are not familiar with it or have not read these
instructions.
Power tools are dangerous if used by inexperienced persons.
e)
Take good care of the power tools. Check to make sure that the moving
parts are functioning properly and not stuck, whether parts are broken
or damaged so as to affect the function of the power tool.
Have damaged parts repaired before you use the device. A large number
of accidents are caused by poorly maintained power tools.
f)
Keep cutting tools sharp and clean.
Well maintained cutting tools with
sharp cutting edges are less likely to catch and are easier to guide.
g) Use the power tool, accessories, insertion tools etc. in accordance with
these instructions. At the same time, consider the working conditions
and the work to be performed. Using power tools for applications other
than the intended ones may result in dangerous situations.
Service
a)
Only have your power tool repaired by a qualified professional and only
with original spare parts.
This will ensure that the safety of the power tool
is not compromised.