Workzone MMA-140, Инструкция по эксплуатации

Страница: 21 / 28

21
140AMP Inverter Welder
01904 727506 www.coreservice.co.uk
GB
01247 5150
IRE
AFTER SALES SUPPORT MMA-140 76597 09/2017
Operation
Before commencing, make sure that your hand held welding mask
or welding helmet is in position to protect your eyes. Wear gloves
burns.
Please note your MMA-140 inverter welder is only ideal for arc
welding.
Turn on switch
Power switch is at the back of machine.
When the switch is in the “0 ” position means the power OFF.
When the switch in the “1” position means the power is ON, and the
switch will light red.
Striking arc
This is done by bringing the electrode into contact with the
workpiece using a light tapping action and withdrawing to create a
gap of 1.5 mm – 3.00 mm.
Maintaining arc
Having created an arc, all that is necessary to maintain it is to
proceed steadily in one direction keeping the gap between the
electrode and the workpiece constant.
gap, and in doing so will melt the electrode core wire and protective
transferred to the workpiece under a protective slag formed by the
Operation