Workzone MMA-140, Инструкция по эксплуатации

Страница: 11 / 28

11
140AMP Inverter Welder
01904 727506 www.coreservice.co.uk
GB
01247 5150
IRE
AFTER SALES SUPPORT MMA-140 76597 09/2017
30mA or less. Please contact our After Sales Support for further
information.
Extension leads
In general these are best avoided. If used however make sure that
the extension lead used with the welder is of a suitable current
rating and has an earth connection. If using the welder outdoors
make sure that the extension cable is suitable for outdoor use.
Always keep cables and extension leads away from the welding
zone and any hot materials.
Consider work area environment
Do not expose the welder to rain. Do not use it in damp, or wet
locations. Keep the work area well lit.
Dress properly
using the welder. Avoid exposing skin to the ultraviolet rays
produced by the arc.
Always use the welding mask
Under no circumstances should the welder be operated unless the
welding mask is protecting the eyes and face. There is a serious
risk of eye damage if the mask is not used. The sparks and metal
projectiles can cause serious damage to the eyes and face. The light
radiation produced by the arc can cause damage to eyesight and
burns on the skin. Never remove the welding mask whilst welding.
Safety Instructions