Workzone M1Y-DU10-190, Оригинальная инструкция по эксплуатации

Страница: 18 / 28

Removing the saw blade (figure B)
• Undo the wing nut (7) and remove the parallel guide stop (8).
• Loosen the depth adjustment locking lever (27) and set the cutting depth to the minimum
position “0 mm”.
Tighten the depth adjustment locking lever (27) again.
WARNING Make sure that the plug is not connected to the mains and observe the
general safety instructions before you assemble the tool.
WARNING Only use the spindle lock button if the plug is not plugged into the
mains.
4
Technical data
5
Assembly
Model designation M1Y-DU10-190
Mains voltage/frequency
Rated power Idle speed
No load speed
for wood working
Electrical Protection Class
pressure level ( LpA) Sound
power level (L
WA
)
Vibration emissions
Saw blade diameter
220-240V~ / 50Hz
1500 W
4500 min
-1
63 mm at 0° bevel angle
40 mm at 45° bevel angle
II
91 dB(A); k = 4 dB
102 dB(A); k = 4 dB
Idling ah,D = 3.9 m/s2
Uncertainty = 1,5 m/s2
190mm
12
M1Y-DU10-190 / 90704
After Sale support
0845 872 2740
GB
019022605
IRL
www.sumecservicecentre.co.uk