Workzone GT-DC-02, Руководство пользователя

Страница: 4 / 11

6 7
AFTER SALES SUPPORT
0800 / 328 6020 info@dariolondon.com
00800 / 4467 5888
GT-DC-02, 02/13, E45316
AFTER SALES SUPPORT
0800 / 328 6020 info@dariolondon.com
00800 / 4467 5888
GT-DC-02, 02/13, E45316
Functions
1. The zero setting in any position simplifies stage measurements.
Press the zero gauge (ZERO) in order to define the zero point.
This enables difference measurements (negative measurements
are displayed with a „- “).
2. Inch/mm conversion in any position. Press the mm/inch key in
order to display the measurement result in a different unit.
3. For very precise measurements, the caliper gauge can be
operated particularly precisely using the fine-tuning wheel.
4. Automatic and manual power switch-on/switch-off.
Maintenance/Storage
1. Prior to use, clean the surface of the measuring scale with a dry
and clean cloth (or a light cleaning oil). Protect the measuring
scale from watery liquid.
2. Only clean with a dry cloth and some cleaning oil; do not use
any water, solvent or abrasive detergent.
3. Remove the battery if the instrument is not being used for a
longer period of time.
4. Preferably store the caliper gauge in the case in order to provide
optimum protection.
Use
1. Preparation:
(1) Wipe of the surface of the measuring scale and clean the
measuring surfaces.
(2) Loosen and move the safety screw, check the ease of movement
over the entire measuring range.
(3) Insert battery as described on page 8.
(4) Switch on device and check whether the LCD display and all keys
function faultlessly.
2. Measurement:
(1) Press the On/Off key in order to switch on the power. The device is
also switched on by activating the caliper gauge.
(2) Press mm/inch key in order to select the required unit of measure.
(3) Move the slider until the outer measurement surfaces touch
lightly, then press the zero gauge (ZERO) in order to start the
regular measurement. With the safety screw, you can fix the
caliper gauge in order to ensure the measurement result.