First use
10
First use
Checking the cabinet and package contents
NOTICE!
Risk of damage!
If you are not cautious when opening the packaging with a sharp
knife or other pointed object, you may quickly damage the product.
− For this reason, be very careful when opening it.
The chest is packed in a carton box inside the base cabinet and
the individual parts are stored in the drawers for easy delivery.
1. Take the base cabinet
2
out of the packaging.
2. Remove the four sets of M6 nuts
3
, M6 bolts (14 mm)
4
and M6 washers
5
from the base cabinet with a 12 mm wrench
20
.
Save the removed bolts, washers and nuts for the cabinet assembly.
3. Lift off the base cabinet to remove the chest
1
inside (see
Fig. B
). Take the chest
out of the packaging.
4. Check to make sure that all parts are included (see
Fig. A
).
5. Check whether any of the individual parts are damaged. If this is the case, do not
assemble the cabinet. Contact the manufacturer via the service address indicated
on the warranty card.
Basic cleaning
1. Remove the packaging material and all plastic wrappings.
2. Clean all parts of the cabinet before first use as described in the chapter “Cleaning
and maintenance”.
Assembly
− Begin the assembly of the cabinet close to the intended use location.
− A 12 mm wrench
20
and a cross-head screwdriver
21
(not
provided) are required for the assembly.
− During the assembly make sure that all screws and nuts are
initially loosely fastened and only fully tighten all screws and nuts
when the assembly is completed.
