19
19
AFTER SALES SUPPORT
e-mail: [email protected]
1300 889 028 (toll free)
MODEL No.: CDLID20 • 63520 • 03/2019
product will perform better when less pressure is applied. Applying
excessive pressure will slow the random orbital motion and reduce the
effectiveness of the product.
9.5 Attaching the polishing / buffing bonnet (6) to the foam pad
base(5) (See Fig. J)
WARNING:
When changing accessories, BE SURE that the On/Off
switch (2) is in the OFF position and the battery pack (4) has been
removed.
1. Place the polishing / buffing bonnet (6) on to the foam pad base (5)
as shown in Fig. J1,J2.
2. Always make sure that the elastic strip on the bottom of the bonnet
is securely tucked on the underside of the foam pad base (5).
9.6 Polishing - removing the wax from the surface
NOTE:
Remove wax in the same order in which it was applied.
1. Wait until wax has dried to an even haze on vehicle.
2. Turn the product On by pressing the “I” on the on/off switch (2).
3. Turn the product Off by pressing the “O” on the on /off switch (2)
IMPORTANT:
Do not apply excessive pressure against the work surface
with this product.
The random orbital motion feature on this product will perform better
J1
J2
Содержание CDLID20
Страница 30: ...This is a blank page ...
Страница 31: ...This is a blank page ...
