ALBION
GENERAL CARE
Designed by us, reimagined by you, Albion systems furniture is
handmade entirely in the UK to an almost infinite range of combinations.
This is British craftsmanship made to last, for spaces that need to deliver.
poseur
/ multi-top assembly
Rack Systems (Engineering) Ltd, 1 Wits End, Kirkby Mills Industrial Estate, Kirkbymoorside, York YO62 6PG
t:
01751 432647
www.racksystems.co.uk
1.
Position a pre-assembled end leg set with the end and top rails as above.
2.
Align rails at connection points and secure by passing the M8 connector cap
through the bracket and rail. Insert the M8 x 30 socket screw into the rear of the
rail and tighten.
3.
Ensure the grub screws in the spigots are wound in, then slide foot rails
over the spigots.
4.
Unwind the grub screw, into the foot rail to secure.
5.
Position the inter leg set assembly and slide onto foot rails, unwind grub
screw into the foot rail as step 4.
6.
Secure connection points between the leg assemblies and rails as step 2.
7.
Turn the assembly over to the correct orientation and build off this to
achieve desired length, repeating previous steps as required.
10.
Slide the triangulation rails into the end foot rails, ensuring they are fully inserted.
11.
Unwind the M8 button head bolt in the triangulation rail to secure.
12.
Attach table tops to frame using M6 x 15 connector bolts through the leg
brackets and triangulation rails.
13.
Slide the spacer clips through the slots in the top rails and secure using 70mm
woodscrews.
8.
Once the final set of rails are attached, attached the final end leg assembly
as step 2.
9.
If using triangulation rails, breakout the triangulation covers from the end foot
rails with a screwdriver.
10
. Screw the M8 x 20mm button head bolts into the rivnuts in the triangulation
rails. Ensure the bolt is fully screwed in.
E
F
G
M
4 + 5mm
2.
1.
3.
4.
5.
6.
MINS
SPLINTA POSEUR CONNEKT - 6/8 LEG TABLE
ASSEMBLY INSTRUCTIONS
48
SPLINTA POSEUR CONNEKT - Assembly Instructions
6/8 LEG TABLE
Page 24
hardware
tool required
4/5mm
allen key
thank you for your purchase!
This page lists the contents included in
the box. Please take time to identify the
hardware as well as the individual
components of the product. As you
unpack and prepare for assembly, place
the contents on a carpeted or padded
area to protect them from damage. Please
follow the assembly instructions closely.
Improper assembly can result in personal
or property damage. 2 adults are required
to safely assemble this product.
!
airfoil
G28T TABLE / 160cm, 180cm, 200cm
cleaning and care
• Clean surfaces with a dry or damp soft cloth.
•
Use water-based cleaning agents only. Do not
use oil or solvent based cleaners.
•
It is recommended to use coasters to protect
surface from heat and water. Do not leave spills
unattended.
• Periodically check and tighten hardware as
necessary.
Made in China - r01
1/2
www.madfurnituredesign.com
x 01
x 04
x 01
x 22
hardware
components
Fixing kit provided