ALBION
GENERAL CARE
Designed by us, reimagined by you, Albion systems furniture is
handmade entirely in the UK to an almost infinite range of combinations.
This is British craftsmanship made to last, for spaces that need to deliver.
poseur
/ multi-top end leg set
• ASSEMBLE THE LEGS & RAILS ON THE FLOOR LIKE ABOVE
• ALIGN THE END RAIL AT THE CONNECTION POINTS OF THE TWO LEGS
• PASS THE M8 CONNECTOR CAP THROUGH THE FRONT OF THE LEG BRACKET AND RAIL. INSERT THE M8
X 30 SOCKET SCREW INTO THE REAR OF THE RAIL AND TIGHTEN SEQUENTIALLY
• POSITION THE END FOOT RAIL BRACKET AGAINST THE NOTCHES IN THE LEGS
• PASS AN M8 X 70MM SOCKET SCREW THROUGH THE APERTURE IN THE UNDERSIDE OF THE END FOOT
RAIL BRACKET AND PUSH INTO LEG CAVITY
• PASS THE M8 CONNECTOR CAP INTO THE HOLE IN THE FRONT OF THE LEG AND TIGHTEN TO SECURE
Rack Systems (Engineering) Ltd, 1 Wits End, Kirkby Mills Industrial Estate, Kirkbymoorside, York YO62 6PG
t:
01751 432647
www.racksystems.co.uk
END RAIL
END FOOT
RAIL BRACKET
END FOOT RAILS
BRACKET APERTURE
M8 CONNECTOR
CAP
M8 X 70MM SOCKET SCREW
SPLINTA POSEUR CONNEKT - END LEG SET
ASSEMBLY INSTRUCTIONS
5mm
7
Assemble the legs & rails on the floor like above.
•
Align the end rail at the connection points of the two legs.
•
Pass the M8 connector cap through the front of the leg bracket and rail. Insert the M8
•
x 30 socket screw into the rear of the rail and tighten sequentially.
Position the end foot rail bracket against the notches in the legs.
•
Pass an M8 x 70mm socket screw through the aperture in the underside of the end
•
foot rail bracket and push into leg cavity.
Pass the M8 connector cap into the hole in the front of the leg and tighten to secure.
•
MINS
SPLINTA POSEUR CONNEKT - Assembly Instructions
END LEG SET
Page 19
hardware
tool required
4/5mm
allen key
thank you for your purchase!
This page lists the contents included in
the box. Please take time to identify the
hardware as well as the individual
components of the product. As you
unpack and prepare for assembly, place
the contents on a carpeted or padded
area to protect them from damage. Please
follow the assembly instructions closely.
Improper assembly can result in personal
or property damage. 2 adults are required
to safely assemble this product.
!
airfoil
G28T TABLE / 160cm, 180cm, 200cm
cleaning and care
• Clean surfaces with a dry or damp soft cloth.
•
Use water-based cleaning agents only. Do not
use oil or solvent based cleaners.
•
It is recommended to use coasters to protect
surface from heat and water. Do not leave spills
unattended.
• Periodically check and tighten hardware as
necessary.
Made in China - r01
1/2
www.madfurnituredesign.com
x 01
x 04
x 01
x 22
hardware
components
Fixing kit provided